Test Probe for Measuring Surface Temperature
The probe for measuring surface temperature is designed according to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6. It’s mainly used to test the temperature rise of the front and side of the cooker, oven and tumble dryers, 4N force is applied according to the standard.
Parameters:
|
Copper Sheet |
Diameter 5mm, thickness 0.5mm |
|
Thermocouple |
0.3mm diameter, American OMEGA K type |
|
Insulated Pipe |
Polycarbonate, inner diameter 3 mm, outer diameter 5 mm |
|
Hand |
With 4N force |
Usage:
1) . The test shall be carried out after the test corner test is completed.
2) . The equipment under test should be powered for 60mins or it reaches a steady state before test.
3) . The top of the probe was pressed against the surface of the device under test, and a 4 N force should be applied until the temperature was stable.
