Name

Figure number

Parameter

Jointed test finger (test probe B)

IEC60950-1 figure 2A

IEC61032 figure 2

Purpose: Protection of person’s finger from live parts

Specification:

1). Diameter of flexion: Φ12mm

2). Length of flexion: 80mm

3). Diameter of baffle. Φ50mm

4). Length of baffle: 100mm

Test pin (test probe 13)

IEC60950-1 figure 2B

IEC61032 figure 9

Purpose: Protection against access to hazardous live parts in class 0 equipment and class II equipment

Specification:

1). Diameter: Φ3mm (head), Φ4mm (tails)

2). Length of probe: 15mm

3). Diameter of baffle: Φ25mm

4). Thickness of baffle: 4mm

Test probe

IEC60950-1 figure 2C

Purpose: Protection against access to bare parts of TNV circuits.

Specification:

1). Diameter of the probe: Φ12mm

2). Length of the probe: 80mm

3). Diameter of baffle: Φ50mm

4). Thickness of baffle: 5mm

Straight unjointed test finger with 30N force (test probe 11)

IEC60950-1 clause 2.1.1.1

IEC61-32 figure 7

Purpose: protection of persons against access to hazardous parts

Specification: the size is as same as test probe B, but without joints, 30N force is applied.

Wedge probe

IEC60950-1 figure EE.1 and EE.2

Purpose:protection from contact hazardous moving parts, including the shredding rollers/mechanisms.

Specification:

1). Diameter of the probe: Φ50mm

2). Length of the probe: 300mm

3). Length of first tip: 30mm

4). Length of second tip: 60mm

5). Length of third tip: 100mm