IPX1 & IPX2 DRIP-PROOF TEST EQUIPMENT

IPX1-2 Drip Box is designed according to IEC60529 clause 14.2.1 and 14.2.2

Request Quote

Your Name (required)

Your Email (required)

Subject

Your Message

IPX1-2 Drip Box (Wall-Mounting Type)

IPX1-2 Vertical Rain Drip Box Waterproof Testing Equipment is designed according to IEC60529 clause 14.2.1 and 14.2.2. It is applied to simulate the conditions of vertically dripping and dripping with 15 degrees tilted, and then to check if the products ( electronics, luminaire, electric components, auto parts and etc.) can meet the requirements. The equipment can be customized according to size of test specimen.

The drip box is for IPX1 and IPX2 testing, the drip board size is 800*800mm, and the aperture of nozzle is Φ0.4mm, distant of drip nozzle is 20mm, sample can be over 50kg.

The IPX1 waterproof testing equipment request the dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm / minute.

The IPX2 waterproof testing equipment request Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt). Water equivalent to 3 mm/minute.

Features:

1. For IPX1 and IPX2 testing

2. Adopts wall-mounting structure, completely meet the requirement of IEC60529.

3. The shell and turntable are made by SUS304 stainless steel, to ensure the rustless for long time use.

4. Equipped with flowmeter, can accurately manually adjust the flowmeter.

5. The cone-sharp nozzles are made by brass, and easy to change. The stainless steel protective cover under the nozzles can protect user from injury.

6. Equipped with high accuracy filter, the filter element can be changed regularly.

7. The drip board can lift, and will auto stop at the position of 200mm above the test specimen.

8. Control system: 7 inch touch screen+ Panasonic PLC.

Specification: